Welcome visitor you can login or create an account.
Shopping Cart
0 item(s) - AED0.00
Your shopping cart is empty!

Audio Technica AT-PHA100 Portable AMP

Brand: Audio-Technica
Product Code: AT-PHA100 P
Availability: In Stock
Ex Tax: AED2,399.05

You don’t have to settle for wimpy, muddy sound just because you’re on the go. The AT-PHA100 Portable Headphone Amplifier is small (width and length comparable to a smartphone) but packs a powerful punch. Engineered using select audio components, and enclosed in all-aluminum casing to protect the circuitry, the AT-PHA100 gives headphones a rich, detailed boost throughout the sonic range with ultra-low distortion. 

The AT-PHA100 is equipped with both analog and digital inputs (3.5 mm jack and USB micro-B, respectively) and 3.5 mm headphone jack. It also features a high/low gain switch, machined aluminum volume knob, and five-stage sampling indicator for digital input. The internal lithium polymer rechargeable battery lasts up to 14 hours when amplifying an analog signal, and up to 6 hours when amplifying a digital signal. 

The amplifier comes with two rubber bands and a rubber mat for strapping the unit to a smartphone or other portable device, a 1.0 m USB cable (USB 2.0 to USB micro-B) and a 10 cm audio cable terminating in a 3.5 mm gold-plated stereo mini plug at each end. 


System Requirements: PC: with built-in USB port corresponding to USB 2.0 

CPU: Intel Core2 CPU2.2 GHz or equivalent 

RAM: 32-bit OS 2 GB or more, 64-bit OS 4 GB or more 
Supported OS: Windows XP (32-bit)*, Windows 7, Windows 8, Windows 8.1 
Mac OSX Mavericks (10.9) 
* Technical support by Microsoft is no longer available. 

Corresponding Headphone Impedance: 10 – 300 ohms 

Maximum Output Level: 100 mW + 100 mW (10% during 16 ohms, THD) 
80 mW + 80 mW (10% during 32 ohms, THD) 
10 mW + 10 mW (10% during 300 ohms, THD) 

Frequency Characteristic: 10 Hz – 100 kHz (-1 dB) 

Signal-to-noise Ratio: 110 dB (A-weighted) 

Total Harmonic Distortion: <=0.001% (32 ohms 10mW output) 

Input Connector: Analog: 3.5 mm (1/8") gold-plated stereo mini jack 

Digital: USB (micro-B)/asynchronous mode/ 
DSD128 (DoP), DSD64 (Native / DoP): 24 – 32 bit/ 
PCM 384kHz, 352.8kHz, 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHz, 32kHz: 16 – 32 bit 

Output Connector: 3.5 mm (1/8") gold-plated stereo mini jack 

Power Supply: 5V DC, 500 mA bus power system (PC)/rechargeable lithium polymer battery (BATTERY) 

Charging Time: Up to 10 hours (DC5V, 500mA) 

Battery Life: Digital about 6 hours (JEITA) / analog about 14 hours (JEITA) 

Operating Temperature: 41 – 104° F (5° – 40° C) 

Dimensions (excluding protrusions): 1.1" (27 mm) H × 3.0" (77 mm) W × 4.6" (116 mm) D 

Weight: About 240 g 

Accessories Included: 1.0 m USB cable (USB 2.0 to USB micro-B), 10 cm audio cable (3.5 mm gold-plated stereo mini plugs x 2), rubber mat, two rubber bands 

Common spec for analog/digital without annotation 
Fs=384 kHz, 32-bit for digital input 

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: