Welcome visitor you can login or create an account.
Shopping Cart
0 item(s) - AED0.00
Your shopping cart is empty!

Audio Technica ATW-1102

Brand: Audio-Technica
Product Code: ATW-1102
Availability: In Stock
Price:
AED1,049.00
Ex Tax: AED999.05

Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display. 
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity. 
Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

Features

Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

2.4 GHz range – completely free from TV interference

Three levels of diversity assurance: frequency, time, & space

Automatic frequency selection for seamless, interference-free operation

Extremely easy operation with instantaneous channel selection, sync, and set-up

State-of-the-art digital receiver for reliable performance

Balanced XLR and unbalanced 1/4” output jacks with level control

Overall System Specifications

Operating Frequencies: 2.4 GHz ISM band

Dynamic Range: >109 dB (A-weighted), typical

Total Harmonic Distortion: <0.05% typical

Operating Range: 30 m (100') typical, open range environment with no interfering signals

Operating Temperature Range: 0° C to +40° C (32° F to 104° F) 

Battery performance may be reduced at very low temperatures

Frequency Response: 20 Hz to 20 kHz 

Depending on microphone type

Receiver Specifications

Receiving System: Diversity (frequency/time/space)

Maximum Output Level: XLR, balanced: 0 dBV

1/4" (6.3 mm), unbalanced: +6 dBV

Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply

Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06")D

Net Weight: 290 grams (10.2 oz)

Accessory Included: Power supply

Body-Pack Transmitter Specifications

RF Power Output: 10 mW

Spurious Emissions: Following federal and national regulations

Input Connections: Four-pin Locking Connector 

Pin 1: GND, Pin 2: INST INPUT, 

Pin 3: MIC INPUT, Pin 4: DC BIAS +9V

Batteries: Two-1.5V AA (not included)

Battery Life: >7 hours (alkaline) Depending on battery type and use pattern

Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D

Net Weight: 100 grams (3.5 oz) without batteries

Handheld Transmitter Specifications

RF Power Output: 10 mW

Spurious Emissions: Following federal and national regulations

Batteries: Two-1.5V AA not included

Battery Life: >7 hours (alkaline) Depending on battery type and use pattern

Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter

Net Weight: 280 grams (9.9 oz) without batteries

Accessory Included: AT8456a Quiet-Flex™ stand clamp

 

Write a review

Your Name:



Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: