Welcome visitor you can login or create an account.
Shopping Cart
0 item(s) - AED0.00
Your shopping cart is empty!

Audio Technica AT2050

Brand: Audio-Technica
Product Code: AT2050
Availability: Out Of Stock
Price:
AED949.00

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. 

Features

Three switchable polar patterns: omni, cardioid, figure-of-eight

Switchable 80 Hz high-pass filter and 10 dB pad

Large diaphragm for smooth, natural sound and low noise

State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards

Includes shock mount & protective pouch

Technical Specifications

Element: Externally-polarized (DC bias) condenser

Polar Pattern: Cardioid, Omnidirectional, Figure-of-Eight

Frequency Response: 20-20,000 Hz

Low Frequency Roll-Off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: –42 dB (7.9 mV) re 1V at 1 Pa

Impedance: 120 ohms

Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D 158 dB SPL, with 10 dB pad (nominal)

Noise: 17 dB SPL

Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL

Signal-To-Noise Ratio: 77 dB, 1 kHz at 1 Pa

Phantom Power Requirements: 11-52V DC, 4.7 mA typical

Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)

Weight: 412 g (14.5 oz)

Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter

Output Connector: Integral 3-pin XLRM-type

Accessories Furnished: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Audio-Technica Case Style: R5

Write a review

Your Name:



Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: